Riso 7010R Guia do Utilizador descarregar pdf (Página 24)

ComColor Series Administrator's Guide 01

When using Non-RISO ink, configure this setting for each ink color.

Prohibited, Permitted

● The following problems may occur when using Non-RISO ink.

- Fading of prints and color tone changes due to differences in ink performance.

- Fading of prints or damage to the inkjet head (requiring replacement) due to a chemical reaction between the

ink and the parts in direct contact with the ink (inkjet head, ink path, etc.)

- Ink leaks (requiring replacement of the ink path) caused by air entering the ink path due to a chemical

reaction between the ink and the ink path (tubes, etc.)

● Malfunctions and reductions in performance as a result of using Non-RISO ink are not covered by the product

warranty or service contract. The inkjet head and ink path are expensive parts. In addition, it takes a long time to

replace these parts.

● Depending on the ink cartridge, you may not be able to use the ink cartridge even when the setting is set to

[Perm].

Non-RISO Ink Setting (Only on the operation panel)

Please understand the above risks associated with

using Non-RISO ink before configuring the following

settings.

Press [Non RISO ink setting] on

the [Admin. Settings] screen.

Select [Perm], and then press

[OK].

Confirm the contents of the

confirmation message, and then

press [Yes].

1 2 ... 19 20 21 22 23 24 25 26 27 28

Sem comentários

Riso 7010R Guia do Utilizador Página 24