Riso 7010R Manual do Utilizador descarregar pdf (Página 4)

4

9050, 9050R, 7050, 7050R, 3050,

27. Remove the Shock Absorbing Block on

the Drainage Tank.

Shock Absorbing Block

25. Secure the Bottom Cover.

9050, 9050R, 7050, 7050R, 3050, 3050R

:

When securing the screw at the right

side, pull out the Front Tray. (Binding

screw M4x8 2pcs.)

7010, 7010R, 3010, 3010R

:

Attach the Bottom Cover in order as

shown in the illustration.

1) Place the Bottom Cover to  t its hook

to the square hole on the le side of

the printer.

2) Snap the hooks of the F-Cover;

Bottom to the securing holes on the

Bottom Cover.

26. Replace the Inner Cover. (7 screws)

Bottom Cover

Drainage Tank

1

2

3

Bottom Cover

7010, 7010R, 3010,

Hook

F-Cover; Bottom

Securing hole

Hook

5

28. Secure the Face Down Bracket; F.

(Double-washered screw M4x8 2pcs.)

29. Secure the Face Down Bracket; R.

(Double-washered screw M4x8 2pcs.)

30. Insert the Face Down Tray Assy into

the Face Down Bracket; F and the Face

Down Bracket; R, then plug in the

connector.

Important: Be sure to lead the wire

harness on the back side of the Face

Down Tray Assy to pass through the

round cut as shown in the illustration.

Face Down Bracket; R

Face Down Bracket; F

Face Down Tray Assy

Face Down

Bracket; R

31. Secure the Face Down Tray Assy on the

Face Down Brackets.

(Binding screw M4x6 2pcs.)

32. Insert the Face Down Sub Fence; F into

the Face Down Fence; F.

Note :

Be sure to fit the three hooks to the

Face Down Fence; F.

33. Insert the Face Down Sub Fence; R into

the Face Down Fence; R.

Note :

Be sure to fit the three hooks to the

Face Down Fence; R.

Hook

Hook

Face Down Sub Fence; R

Face Down Sub Fence; F

Face Down Fence; R

Face Down Fence; F

When installing the Face Down Offset

Tray, the following procedures 28 - 33

are not required.

Round cut

1 2 3 4

Comentários a estes Manuais

Sem comentários